- Water Treatment Chemicals
- Ferric Alum
- Polyelectrolyte
- Sodium Meta Bi Sulphite
- Sodium Bi Sulphite
- Sodium Sulphite
- Non Ferric Alum
- Soda Ash
- Sodium Bi Carbonate
- Ferric Chloride Anhydrous
- Ferric Chloride Liquid
- Common Salt
- Ethylene Diamine Tetra Acetic Acid
- EDTA Trisodium
- Sodium Hexa Meta Phosphate
- Tri Sodium Phosphate (TSP)
- Liquor Ammonia
- Cyclohexane
- Morpholine
- Sodium Hydroxide
- Water Softening Chemical
- Boric Acid
- Acetic Acid
- Boiler Chemicals
- Cooling Tower Chemicals
- Polyelectrolyte Anionic
- Polyelectrolyte Cationic
- Anionic Polyacrylamide PAM
- Cationic Polyacrylamide PAM
- Per chloro Ethylene
- Tri Chloro Ethylene
- Hydrated Lime
- Sulphuric Acid
- Hydrochloric Acid
- Hydrazine Hydrate 80%
- Sulphamic Acid
- Sulfamic Acid
- Ferrous Sulphate
- Poly Aluminium Chloride
Water Softening Chemical
In Czech Republic
A water softener is a device or a substance, that remove or renders inactive and isolate minerals, such as Calcium, Magnesium. Water containing dissolved calcium and magnesium in amount greater than 120mg./1 is considered hard, this water destroys the detergent property of soaps. On heating & cooling, it forms scales which corrodes. This chemical softener is made using premium quality of raw materials and is widely demanded in the global markets. They can also be designed as per the required technical specifications and are easy to install.
Our chemical softener completely removes the dissolved impurities and minerals which can cause a harmful affect on the health. Our chemical softener extends the life of plumbing systems and water – using appliances through the reduction of clogging from scale within the pipes. It also reduces soapy residue on cloths, film on tub and shower tiles and scratching on bathroom fixtures. It also decreases cooking gas consumption by 30%.
The Water Softening Plants are designed to produce treated water to suit for various applications. Treated water is of consistency quality with low residual hardness throughout the service cycle.
The high synthetic resin is used to exchange Sodium ion with hardness forming Calcium and Magnesium ions. After producing desired output, the resin is regenerated with (NaCI) Sodium Chloride solution after which unit is again ready to deliver next batch. The Water Softening Plant units are available with different models. The difference between these models is in the capacity of the resin used for each model. These units are easy to operate and maintenance free. These models are available to produce various capacities up to 200 Cu. Meters per hour maximum.