- Water Treatment Chemicals
- Ferric Alum
- Polyelectrolyte
- Sodium Meta Bi Sulphite
- Sodium Bi Sulphite
- Sodium Sulphite
- Non Ferric Alum
- Soda Ash
- Sodium Bi Carbonate
- Ferric Chloride Anhydrous
- Ferric Chloride Liquid
- Common Salt
- Ethylene Diamine Tetra Acetic Acid
- EDTA Trisodium
- Sodium Hexa Meta Phosphate
- Tri Sodium Phosphate (TSP)
- Liquor Ammonia
- Cyclohexane
- Morpholine
- Sodium Hydroxide
- Water Softening Chemical
- Boric Acid
- Acetic Acid
- Boiler Chemicals
- Cooling Tower Chemicals
- Polyelectrolyte Anionic
- Polyelectrolyte Cationic
- Anionic Polyacrylamide PAM
- Cationic Polyacrylamide PAM
- Per chloro Ethylene
- Tri Chloro Ethylene
- Hydrated Lime
- Sulphuric Acid
- Hydrochloric Acid
- Hydrazine Hydrate 80%
- Sulphamic Acid
- Sulfamic Acid
- Ferrous Sulphate
- Poly Aluminium Chloride
Cationic Polyacrylamide PAM
In Czech Republic
We supply full range of cationic dry powder (CPAM) flocculants that are particularly effective in primary clarification, sludge thickening and sludge dewatering applications in the municipal area.
These cationic flocculants are also offered in a range of molecular weights. This enables the customer to select the optimum polymer depending on application needs, such as low molecular weights for low shear applications e.g. gravity belt thickener to very high molecular weights for high shear environments e.g. centrifuge decanters.
Cationic polyacrylamide CPAM, is the linear polymer compound, because it has many active groups, but with many substances affinity, adsorption of hydrogen bond formation. Mainly flocculation the negatively charged colloid, have except turbidity and decoloring, adsorption, adhesion and other functions, suitable for dyeing, papermaking wastewater treatment, food, building, metallurgy, mineral processing, coal, oil, aquatic products processing and fermentation organic colloid content higher, especially suitable for dewatering sludge, sewage treatment, city city papermaking sludge and other industrial sludge.
Features
1. Good water solubility, can be completely dissolved in water.
2. Add a small amount of cationic polyacrylamide products, can be greatly the flocculation effect. The general need to add 0.01~10ppm (0.01~10g/m3), can give full play to the role of.
3. At the same time, the use of cationic polyacrylamide products and inorganic flocculant (ferric sulfate, polyaluminum chloride, iron etc.), but showed a greater effect.
Uses
1. Clarification and purification effect;
2. To promote the role of settlement;
3. Filtering effect;
4. The thickening effect and other effects.
5. in the treatment of waste water, sludge thickening and dewatering, mineral processing, coal washing, papermaking etc., can fully meet the requirements of various fields.
For your requirements of Chemicals in Czech Republic, please mail us at vinod@innovacorporate.com Or amavinod@bol.net.in or call us on our Mobile No. +91-9312871070 OR 9911130697.